WhatsApp Icon +971 58 255 9902 Describe Your Project
Home Сontacts

Polyurea Waterproofing in Dubai — Roofs, Pools & Foundations

Polyurea Waterproofing in Dubai — Roofs, Pools & Foundations

Spray-applied seamless waterproofing membrane for commercial, industrial and residential structures. Covers flat roofs, swimming pools, foundations, terraces and underground car parks.

Spray polyurethane foam reduces overheating of structures and indoor spaces, stabilising internal temperatures and lowering the load on air conditioning systems.

Describe Your Project Request Inspection

Seamless membrane — no seams, no overlaps, no weak joints

Fast cure: surface ready within minutes after application

Thickness: 2–4 mm applied in one system

Elastic: withstands structural movement and thermal cycling

SERVICE LIFE: UP TO 20–30 YEARS WHEN CORRECTLY APPLIED AND MAINTAINED

Seamless polyurea waterproofing engineered for Dubai's climate

Seamless polyurea waterproofing engineered for Dubai's climate.

WHY POLYUREA FOR DUBAI

Polyurea waterproofing is designed to perform under Dubai's extreme climate, where constant heat, UV exposure and humidity place continuous stress on roofing systems.

  • Constant heat and UV exposure

    Accelerates ageing of conventional waterproofing materials.

  • Daily thermal movement

    Roof structures expand and contract, stressing joints and details.

  • Vulnerable joints & penetrations

    Corners, pipe entries and transitions are where most failures begin.

  • Humidity and moisture ingress

    Water penetrates through weak points and gradually damages the structure.

  • Seamless protective membrane

    Polyurea creates a continuous waterproof layer with no joints or overlaps.

WHERE WE APPLY POLYUREA WATERPROOFING

ROOFS

The primary application. Flat roofs, technical roofs, roof terraces and plant room areas. Seamless membrane covers the full surface including parapets, drainage points, pipe entries and equipment bases – the zones where leaks most often start. Works over concrete, metal and existing membrane surfaces after preparation. Typical scope: 500-5,000+ m².

Describe Your Project
Roofs application

FOUNDATIONS AND UNDERGROUND STRUCTURES

One of the strongest B2B segments in the UAE. Basement walls and slabs, underground car parks, lift pits and retaining walls. Applied to structures below grade and under hydrostatic pressure. Used on new-build and existing buildings where moisture ingress is active or at risk.

Describe Your Project
Foundations and underground structures application Describe Your Project

SWIMMING POOLS

A significant and growing segment in Dubai. Applied to private villa pools, hotel pools, residential community pools and commercial water features. Covers the concrete shell, overflow channels, pipe entries and connection points. Each system is selected and certified for continuous water contact, with chemical resistance matched to the pool's treatment type.

Describe Your Project
Swimming pools application Describe Your Project

TERRACES AND BALCONIES

Exposed terraces with transitions between materials, wall connections, drainage slopes and surface penetrations.

Describe Your Project
Terraces and balconies application Describe Your Project

TECHNICAL AND WET AREAS

Utility rooms, plant areas, water storage tanks, drainage channels and surfaces with regular water exposure.

Describe Your Project
Technical and wet areas application Describe Your Project

WHERE LEAKS MOST OFTEN START

ALL CRITICAL DETAILS ARE TREATED BEFORE THE MAIN APPLICATION LAYER IS SPRAYED.

Details determine how the system performs in operation.

dot 01

Joints and connections between structural elements

dot 02

Service entry points and pipe penetrations

dot 03

Wall-roof junctions and parapet connections

dot 04

Drainage points and sump areas

dot 05

Transitions between different substrate materials

ALL CRITICAL DETAILS ARE TREATED BEFORE THE MAIN APPLICATION LAYER IS SPRAYED.

Details determine how the system performs in operation.

TECHNICAL SPECIFICATIONS

Seamless elastic membrane covers the full surface with no joints

Thickness: 2–4 mm, fast cure — trafficable within minutes

Elastic: withstands structural movement and thermal cycling in UAE climate

  • dot Elongation at break 300–600%
  • dot Adhesion to concrete, metal, bitumen
  • dot Operating temperature -40°C to +120°C
  • dot Service life up to 20–30 years when correctly applied
  • dot UV protection required for outdoor use

APPLICATION — HOW THE SYSTEM IS BUILT

The service life of waterproofing is not defined after completion — it is formed during execution.

01

Inspection

We assess the substrate, identify risk zones and define the scope.

02

System selection

Polyurea, SPF or combined — matched to the structure and UAE climate conditions.

03

Application

Surface preparation, detail treatment, spray application with layer thickness control.

04

Handover

Final inspection, material certificates and as-built documentation.

Material & Surface Preparation

Material compliance, storage conditions and readiness are verified before work begins. The surface is cleaned, repaired, primed and prepared for adhesion.

Detail Treatment

All corners, joints, penetrations and transitions are treated individually before the main coat is applied.

Controlled Application

Layer thickness and uniformity are monitored throughout the application process. Each stage is documented.

Inspection & Handover

Coating continuity is verified. Material certificates and as-built documentation are provided on completion.

Our Clients

Who typically orders polyurea waterproofing Who we work with

Residential development
Developers Developers and project owners
Main contractors on site
Main Contractors
Flat roof waterproofing
Roofing contractors
Industrial warehouse
Industrial Operators
Facility manager on site
Facility Management Companies Facility and property management companies
Facility manager on site
Property Owners Property Owners
Facility manager on site
Facility and property management companies Facility and property management companies

Case studies — local projects

Dubai Marina

Hotel pool

Scope: 320 m²
Timeline: 3 days

Area: concrete shell + overflow channel

Solution: Chemical-resistant polyurea, water-contact certified, 3 mm

Result: Seamless membrane installed; project delivered according to specification

Hotel pool waterproofing in Dubai Marina
Dubai Industrial Area

Warehouse roof

Scope: metal roof 2,400 m²
Timeline: 4 days

Solution: SPF 80 mm + polyurea protective coat

System installed: SPF insulation and polyurea protective coat installed; project handed over within agreed timeline

Warehouse roof insulation in Dubai Industrial Area

FAQ — Polyurea waterproofing

Yes, after proper surface preparation — removal of loose material, priming and repair of defects.

Yes. Water-contact certified, chemical-resistant polyurea grades are specified for pools and balancing tanks.

It is usually condensation rather than a leak. A site inspection will establish the source before any work is proposed.

Adhesion depends on it. Loose material, laitance and moisture in the substrate are the most common causes of coating failure.